วันพุธที่ 20 กุมภาพันธ์ พ.ศ. 2556

Assignment 6 -->Process Description

Assignment 6 =>Process Description


1.worry
2.use
3.store
4.has
5.recharge
6.put
7.grows
8.damage
9.see
10.rotates
11.tell
12.plug



a  Maker sure that the edge of the pond is the same level all around.  2
b  When the pond is full, cut the liner to fit. 5
First  , dig a hole the size and shape you want your pond to be. 1
Next , line the hole with damp sand.3
Finally , put stones around the edge of the pond to complete it.6
After that, put the liner in the pond and fill it with water.4


A  4  It was still very hard to open and close, so I squirted even more Mr. Fixit inside.
B  7  But I still can’t go anywhere. When I checked the tyres , one of them was flat!
C  1  I didn’t use my bike all winter. In spring, the lock was rusted shut.
D  3  I soaked it in Mr. Fixit and left it for a while.
 5  I sprayed on some more Mr. Fixit and loosened it some more.
F  6  That did the trick. The lock now works perfectly.
G  2  It wouldn’t budge.
H  8 A little later, I gave it a tug and it moved.

วันพฤหัสบดีที่ 3 มกราคม พ.ศ. 2556

..

Make sure    that the edge of the pond is the same level all around
Next             the pond is full  cut the liner to fit
First             dig a hole the size and shape you want your pond to be
When            line the hole with damp sand
Finally           put stones around the edge  of the pond to complete it
After             that put the liner liner in the pond and fill it  with water